SEQanswers

SEQanswers (http://seqanswers.com/forums/index.php)
-   Illumina/Solexa (http://seqanswers.com/forums/forumdisplay.php?f=6)
-   -   NovaSeq placement issue (http://seqanswers.com/forums/showthread.php?t=88148)

The_Roads 03-13-2019 06:11 AM

NovaSeq placement issue
 
Hi,

has anyone had issues with placement of NovaSeq in LEED buildings or other buildings with variable temp and humidity profiles?

Grateful for any input, trying to determine the right location for ours.

thanks,
The_Roads

microgirl123 03-13-2019 12:06 PM

I don't have advice specific to the NovaSeq, but I had to move our MiSeq because the room it was in was slightly too hot (74deg F) so the chiller never worked optimally and the temperature always ran at the top range of normal. The room it is in now averages about 70, and it's much happier, running at around 5 deg C. So . . . small changes in temperature make a big difference in the temperature the chiller can achieve.


All times are GMT -8. The time now is 03:58 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.