Seqanswers Leaderboard Ad

Collapse

Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CASAVA 1.7 Install Help

    Hi everyone,

    I've been trying to install CASAVA 1.7 on Ubuntu 11 and I have an issue during configuration

    root@ali-iMac:/usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build# /usr/local/CASAVA_v1.7.0/src/configure
    cmake version "cmake version 2.8.0" is already installed at /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/bootstrap/bin/cmake
    nothing to be done
    Using installed /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/bootstrap/bin/cmake
    -- The C compiler identification is GNU
    -- The CXX compiler identification is GNU
    -- Check for working C compiler: /usr/bin/gcc
    -- Check for working C compiler: /usr/bin/gcc -- works
    -- Detecting C compiler ABI info
    -- Detecting C compiler ABI info - done
    -- Check for working CXX compiler: /usr/bin/c++
    -- Check for working CXX compiler: /usr/bin/c++ -- works
    -- Detecting CXX compiler ABI info
    -- Detecting CXX compiler ABI info - done
    -- install prefix: /usr/local
    -- install exec prefix: .
    -- install bin dir: ./bin
    -- install lib dir: ./lib/CASAVA-1.7.0
    -- install libexec dir: ./libexec/CASAVA-1.7.0
    -- install include dir: include/CASAVA-1.7.0
    -- install data dir: share/CASAVA-1.7.0
    -- install doc dir: doc/CASAVA-1.7.0
    -- install man dir: man
    -- Verifying target directories access
    -- Creating external tools in subdirectory opt
    -- Could NOT find Boost
    -- Boost 1.41.0 not found. Boost will be built from the distribution...
    Decompressing /usr/local/CASAVA_v1.7.0/src/../redist/boost_1_41_0.tar.gz
    Building Boost.Jam with toolset gcc... tools/jam/src/bin.linuxx86_64/bjam
    Unicode/ICU support for Boost.Regex?... not found.
    Backing up existing Boost.Build configuration in project-config.jam.2
    Generating Boost.Build configuration in project-config.jam...

    Bootstrapping is done. To build, run:

    ./bjam

    To adjust configuration, edit 'project-config.jam'.
    Further information:

    - Command line help:
    ./bjam --help

    - Getting started guide:


    - Boost.Build documentation:


    warning: Building Boost.Regex with the optional Unicode/ICU support disabled.
    note: Please refer to the Boost.Regex documentation for more information
    note: this is a strictly optional feature.
    ...patience...
    ...patience...
    ...found 16182 targets...
    ...updating 4 targets...
    gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.5.2/release/link-static/threading-multi/bzip2.o
    gcc.archive bin.v2/libs/iostreams/build/gcc-4.5.2/release/link-static/threading-multi/libboost_iostreams.a
    common.copy /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/opt/bootstrap/lib/libboost_iostreams.a
    ...updated 4 targets...
    boost-1_41_0 installed successfully
    -- Successfuly built boost 1.41.0 from the distribution package...
    -- Installing Post-Run Command Framework
    -- Check if the system is big endian
    -- Searching 16 bit integer
    -- Looking for sys/types.h
    -- Looking for sys/types.h - found
    -- Looking for stdint.h
    -- Looking for stdint.h - found
    -- Looking for stddef.h
    -- Looking for stddef.h - found
    -- Check size of unsigned short
    -- Check size of unsigned short - done
    -- Using unsigned short
    -- Check if the system is big endian - little endian
    -- Looking for floorf
    -- Looking for floorf - found
    -- Looking for round
    -- Looking for round - found
    -- Looking for roundf
    -- Looking for roundf - found
    -- Looking for powf
    -- Looking for powf - found
    -- Looking for erf
    -- Looking for erf - found
    -- Looking for erf
    -- Looking for erf - found
    -- Looking for erfc
    -- Looking for erfc - found
    -- Looking for erfc
    -- Looking for erfc - found
    CMake Error at cmake/cxxConfigure.cmake:71 (message):
    No support for gzip compression
    Call Stack (most recent call first):
    c++/CMakeLists.txt:30 (include)


    -- Configuring incomplete, errors occurred!
    Couldn't configure the project:

    /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/bootstrap/bin/cmake -H"/usr/local/CASAVA_v1.7.0/src" -B"/usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build" -G"Unix Makefiles" -DCASAVA_PREFIX:PATH= -DCASAVA_EXEC_PREFIX:PATH= -DCMAKE_INSTALL_PREFIX:PATH= -DCASAVA_BINDIR:PATH= -DCASAVA_LIBDIR:PATH= -DCASAVA_LIBEXECDIR:PATH= -DCASAVA_INCLUDEDIR:PATH= -DCASAVA_DATADIR:PATH= -DCASAVA_DOCDIR:PATH= -DCASAVA_MANDIR:PATH= -DCMAKE_BUILD_TYPE:STRING=RelWithDebInfo

    Moving CMakeCache.txt to CMakeCache.txt.removed


    Can anyone tell what is going wrong?

    Thanks in advance!

    Ali

  • #2
    Originally posted by aligenie View Post
    Hi everyone,

    I've been trying to install CASAVA 1.7 on Ubuntu 11 and I have an issue during configuration

    [...]
    CMake Error at cmake/cxxConfigure.cmake:71 (message):
    No support for gzip compression
    [...]

    Can anyone tell what is going wrong?
    Have a look if libz header files are installed; check for dev package in synaptic.

    libz (>=1.2.3) <http://www.zlib.net> is a requirement.

    hth,
    Sven

    Comment


    • #3
      I have the same error, and am certain that I've installed the zlib's. Have you found any other way to resolve this issue?

      Dweeb

      Comment


      • #4
        Originally posted by dweebis View Post
        I have the same error, and am certain that I've installed the zlib's. Have you found any other way to resolve this issue?

        Dweeb
        Sure you have installed the dev package (header files)? AFAIR

        libzzip-0-13 - library providing read access on ZIP-archives - library
        libzzip-dev - library providing read access on ZIP-archives - development

        Keep in mind that CASAVA 1.8 is out ...

        hth, Sven

        Comment


        • #5
          I did not have those installed....but I still have the same problem. Ergh.

          Thanks for trying -

          Dweeb

          Comment


          • #6
            Oh - does 1.8 compile where 1.7 doesn't. I'll check compatibility...

            Comment


            • #7
              Essentially the same error with CASAVA-1.8.1

              Here's the error this time:

              HTML Code:
              -- Looking for erfc - found
              CMake Error at cmake/cxxConfigure.cmake:74 (message):
                No support for gzip compression
              Call Stack (most recent call first):
                c++/CMakeLists.txt:33 (include)
              
              
              -- Configuring incomplete, errors occurred!
              Couldn't configure the project:
              
              /media/bigjoe/mpufall/software/CASAVA-1.8.1-build/bootstrap/bin/cmake -H"/media/bigjoe/mpufall/software/CASAVA_v1.8.1/src" -B"/media/bigjoe/mpufall/software/CASAVA-1.8.1-build" -G"Unix Makefiles"  -DCASAVA_PREFIX:PATH=/media/bigjoe/mpufall/software/CASAVA-1.8.1 -DCASAVA_EXEC_PREFIX:PATH= -DCMAKE_INSTALL_PREFIX:PATH=/media/bigjoe/mpufall/software/CASAVA-1.8.1 -DCASAVA_BINDIR:PATH= -DCASAVA_LIBDIR:PATH= -DCASAVA_LIBEXECDIR:PATH= -DCASAVA_INCLUDEDIR:PATH= -DCASAVA_DATADIR:PATH= -DCASAVA_DOCDIR:PATH= -DCASAVA_MANDIR:PATH= -DCMAKE_BUILD_TYPE:STRING=RelWithDebInfo
              
              Moving CMakeCache.txt to CMakeCache.txt.removed
              I'm tracking this down with Illumina...something is funny here...

              Dweeb

              Comment


              • #8
                what system you are running? Distribution 64bit?

                If you have installed zlib development files you can point configure to that location (assuming it is a "non standard" location where zlib headers are installed),

                export CPPFLAGS="-I/path/to/headers"
                ./configure --verbose --prefix=/where/to/put/casava
                should work (in theory) .. but we all know that casava is sometimes very special ;-)
                The verbose option should give you a more detailed hint.

                hth, Sven

                Comment


                • #9
                  Hi Sven -

                  OK - after some effort, I was able to get CASAVA-1.8.1 installed, but not 1.7.0 (which I need at this point as part of a methylation pipeline). Everything was installed, but some things were in this new /usr/linb64/x86_64-linux.gnu instead of just /usr/lib64. As I'm not the slickest guy in the world, I just copied the relevant libraries into /usr/lib64:

                  sudo cp /usr/lib64/x86_64-linux-gnu/zlib.so ..
                  sudo cp /usr/lib64/x86_64-linux-gnu/libpthread* ..

                  I also had to end up installing doxygen:
                  sudo apt-get install doxygen

                  Then everything went fine for CASAVA-1.8.1. Not so for 1.7.0, which completed configure, but failed during make. I may work on this a bit more, but actually to cope I just set up a machine with Lucid 10.04 LTS, and everything installed (and works) beautifully.

                  Cheers -

                  Dweebis

                  Comment


                  • #10
                    I have tried to install CASAVA 1.8.1 in a ubuntu 11.04 machine but no luck. From this post I figure out the problem and made the symlinks accordingly for libz.so and also for pthreads as Dweebis did. But in my case still is producing the same error. Has someone else installed CASAVA 1.8.1 in ubuntu 11.04. PS: I have installed all the programs marked as prerequisites in the user guide.

                    Comment


                    • #11
                      Installation problem in CASAVA1.8.2

                      Hi,

                      I have faced the same problem while configuring the CASAVA1.8.2 on Ubuntu 11.10 (64bit). After going through this thread I followed the same strategy to copy the libz.so and libpthread* to /usr/lib folder. This helped me configure casava successfully.

                      Commands I have used

                      $ sudo cp /usr/lib/x86_64-linux-gnu/libz.so /usr/lib
                      $ sudo cp /usr/lib/x86_64-linux-gnu/libpthread* /usr/lib

                      I am writing this just to mention that the same strategy works for CASAVA 1.8.2 on ubuntu 11.10.

                      Kalyan

                      Originally posted by aligenie View Post
                      Hi everyone,

                      I've been trying to install CASAVA 1.7 on Ubuntu 11 and I have an issue during configuration

                      root@ali-iMac:/usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build# /usr/local/CASAVA_v1.7.0/src/configure
                      cmake version "cmake version 2.8.0" is already installed at /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/bootstrap/bin/cmake
                      nothing to be done
                      Using installed /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/bootstrap/bin/cmake
                      -- The C compiler identification is GNU
                      -- The CXX compiler identification is GNU
                      -- Check for working C compiler: /usr/bin/gcc
                      -- Check for working C compiler: /usr/bin/gcc -- works
                      -- Detecting C compiler ABI info
                      -- Detecting C compiler ABI info - done
                      -- Check for working CXX compiler: /usr/bin/c++
                      -- Check for working CXX compiler: /usr/bin/c++ -- works
                      -- Detecting CXX compiler ABI info
                      -- Detecting CXX compiler ABI info - done
                      -- install prefix: /usr/local
                      -- install exec prefix: .
                      -- install bin dir: ./bin
                      -- install lib dir: ./lib/CASAVA-1.7.0
                      -- install libexec dir: ./libexec/CASAVA-1.7.0
                      -- install include dir: include/CASAVA-1.7.0
                      -- install data dir: share/CASAVA-1.7.0
                      -- install doc dir: doc/CASAVA-1.7.0
                      -- install man dir: man
                      -- Verifying target directories access
                      -- Creating external tools in subdirectory opt
                      -- Could NOT find Boost
                      -- Boost 1.41.0 not found. Boost will be built from the distribution...
                      Decompressing /usr/local/CASAVA_v1.7.0/src/../redist/boost_1_41_0.tar.gz
                      Building Boost.Jam with toolset gcc... tools/jam/src/bin.linuxx86_64/bjam
                      Unicode/ICU support for Boost.Regex?... not found.
                      Backing up existing Boost.Build configuration in project-config.jam.2
                      Generating Boost.Build configuration in project-config.jam...

                      Bootstrapping is done. To build, run:

                      ./bjam

                      To adjust configuration, edit 'project-config.jam'.
                      Further information:

                      - Command line help:
                      ./bjam --help

                      - Getting started guide:


                      - Boost.Build documentation:


                      warning: Building Boost.Regex with the optional Unicode/ICU support disabled.
                      note: Please refer to the Boost.Regex documentation for more information
                      note: this is a strictly optional feature.
                      ...patience...
                      ...patience...
                      ...found 16182 targets...
                      ...updating 4 targets...
                      gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.5.2/release/link-static/threading-multi/bzip2.o
                      gcc.archive bin.v2/libs/iostreams/build/gcc-4.5.2/release/link-static/threading-multi/libboost_iostreams.a
                      common.copy /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/opt/bootstrap/lib/libboost_iostreams.a
                      ...updated 4 targets...
                      boost-1_41_0 installed successfully
                      -- Successfuly built boost 1.41.0 from the distribution package...
                      -- Installing Post-Run Command Framework
                      -- Check if the system is big endian
                      -- Searching 16 bit integer
                      -- Looking for sys/types.h
                      -- Looking for sys/types.h - found
                      -- Looking for stdint.h
                      -- Looking for stdint.h - found
                      -- Looking for stddef.h
                      -- Looking for stddef.h - found
                      -- Check size of unsigned short
                      -- Check size of unsigned short - done
                      -- Using unsigned short
                      -- Check if the system is big endian - little endian
                      -- Looking for floorf
                      -- Looking for floorf - found
                      -- Looking for round
                      -- Looking for round - found
                      -- Looking for roundf
                      -- Looking for roundf - found
                      -- Looking for powf
                      -- Looking for powf - found
                      -- Looking for erf
                      -- Looking for erf - found
                      -- Looking for erf
                      -- Looking for erf - found
                      -- Looking for erfc
                      -- Looking for erfc - found
                      -- Looking for erfc
                      -- Looking for erfc - found
                      CMake Error at cmake/cxxConfigure.cmake:71 (message):
                      No support for gzip compression
                      Call Stack (most recent call first):
                      c++/CMakeLists.txt:30 (include)


                      -- Configuring incomplete, errors occurred!
                      Couldn't configure the project:

                      /usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build/bootstrap/bin/cmake -H"/usr/local/CASAVA_v1.7.0/src" -B"/usr/local/CASAVA_v1.7.0/CASAVA_v1.7.0-build" -G"Unix Makefiles" -DCASAVA_PREFIX:PATH= -DCASAVA_EXEC_PREFIX:PATH= -DCMAKE_INSTALL_PREFIX:PATH= -DCASAVA_BINDIR:PATH= -DCASAVA_LIBDIR:PATH= -DCASAVA_LIBEXECDIR:PATH= -DCASAVA_INCLUDEDIR:PATH= -DCASAVA_DATADIR:PATH= -DCASAVA_DOCDIR:PATH= -DCASAVA_MANDIR:PATH= -DCMAKE_BUILD_TYPE:STRING=RelWithDebInfo

                      Moving CMakeCache.txt to CMakeCache.txt.removed


                      Can anyone tell what is going wrong?

                      Thanks in advance!

                      Ali

                      Comment


                      • #12
                        Hi, an old thread I know, but some fresh experience.

                        We still run Ubuntu 10.04.x in our servers, hence in all our systems. One becomes conservative with experience, and I'd never want to run a non-LTS in an actual prodution environment.

                        First, I would suggest making a symlink like I did instead of copying the libraries, so as not to leave dangling libraries behind (these can lead to hard-to-debug problems in later maintenance) :

                        $ ln -s /usr/lib/x86_64-linux-gnu/libz.so /usr/lib
                        $ ln -s /usr/lib/x86_64-linux-gnu/libpthread* /usr/lib

                        Once that is done, I succeeded even compiling 1.8.2 as static. Of course, quite a few .deb packages needed to be added to our barebones installation (in a real server you never want to install everything between heaven and earth,) and I'd have to install a new workstation to see precisely what. Two that stuck in my mind are ImageMagick and GraphViz, which appeared to be necessary for documentation only. Blecch.

                        Here's the commands I used:

                        $ ionice -c3 ../CASAVA_v1.8.2/src/configure --prefix=/usr/local/biotools/CASAVA_v1.8.2 --with-cmake=`which cmake` --static
                        $ ionice -c3 make -j2
                        $ make install

                        The actual configure and compilation, apart from thrashing my hard disk peformance for which reason ionice, did crash in internal error. I just tried again.

                        I prefer useing the system-installed cmake since (ie. from .deb,) although it didn't solve the Redhat-specific idiocies.

                        Yours, ObOlli

                        Originally posted by kalyankpy View Post
                        Hi,

                        I have faced the same problem while configuring the CASAVA1.8.2 on Ubuntu 11.10 (64bit). After going through this thread I followed the same strategy to copy the libz.so and libpthread* to /usr/lib folder. This helped me configure casava successfully.

                        Commands I have used

                        $ sudo cp /usr/lib/x86_64-linux-gnu/libz.so /usr/lib
                        $ sudo cp /usr/lib/x86_64-linux-gnu/libpthread* /usr/lib

                        I am writing this just to mention that the same strategy works for CASAVA 1.8.2 on ubuntu 11.10.

                        Kalyan
                        Just an IT specialist and administrator at a smallish lab

                        Comment


                        • #13
                          CASAVA 1.8.3 install error on Ubuntu 12.04LTS: &quot;No support for bzip2 compression&quot;

                          Hi,

                          I was trying to install the CASAVA Bcl2Fastq 1.8.3 package on my Ubuntu Server 12.04LTS. First, I encountered the same "No support for gzip compression" discussed in this thread, and the solution here solved this problem However, now it prompts: "No support for bzip2 compression".
                          I am wondering if there is any way to solve this?

                          Here is the detailed install log:
                          Code:
                          administrator@Epizyme2:/tmp/bcl2fastq-1.8.3-build$ sudo ${SOURCE}/src/configure --prefix=${INSTALL} --verbose
                          [sudo] password for administrator: 
                          cmake version "cmake version 2.8.4" is already installed at /tmp/bcl2fastq-1.8.3-build/bootstrap/bin/cmake
                          nothing to be done
                          Using installed /tmp/bcl2fastq-1.8.3-build/bootstrap/bin/cmake
                          Source  directory: /tmp/bcl2fastq-1.8.3/src
                          Prefix  directory: /usr/local/bcl2fastq-1.8.3
                          Exec    directory: 
                          Binary  directory: 
                          Lib     directory: 
                          Libexec directory: 
                          Include directory: 
                          Data    directory: 
                          Doc     directory: 
                          Man     directory: 
                          Build   directory: /tmp/bcl2fastq-1.8.3-build
                          Cmake  executable: /tmp/bcl2fastq-1.8.3-build/bootstrap/bin/cmake
                          
                          Running on: Linux Epizyme2 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
                          Configuring the build directory with:
                              /tmp/bcl2fastq-1.8.3-build/bootstrap/bin/cmake -H"/tmp/bcl2fastq-1.8.3/src" -B"/tmp/bcl2fastq-1.8.3-build" -G"Unix Makefiles" -DCASAVA_PREFIX:PATH=/usr/local/bcl2fastq-1.8.3 -DCASAVA_EXEC_PREFIX:PATH= -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bcl2fastq-1.8.3 -DCASAVA_BINDIR:PATH= -DCASAVA_LIBDIR:PATH= -DCASAVA_LIBEXECDIR:PATH= -DCASAVA_INCLUDEDIR:PATH= -DCASAVA_DATADIR:PATH= -DCASAVA_DOCDIR:PATH= -DCASAVA_MANDIR:PATH= -DCMAKE_BUILD_TYPE:STRING=RelWithDebInfo -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DBoost_DEBUG:BOOL=ON
                          
                          -- The C compiler identification is GNU
                          -- The CXX compiler identification is GNU
                          -- Check for working C compiler: /usr/bin/gcc
                          -- Check for working C compiler: /usr/bin/gcc -- works
                          -- Detecting C compiler ABI info
                          -- Detecting C compiler ABI info - done
                          -- Check for working CXX compiler: /usr/bin/c++
                          -- Check for working CXX compiler: /usr/bin/c++ -- works
                          -- Detecting CXX compiler ABI info
                          -- Detecting CXX compiler ABI info - done
                          -- install      prefix: /usr/local/bcl2fastq-1.8.3
                          -- install exec prefix: .
                          -- install     bin dir: ./bin
                          -- install     lib dir: ./lib/bcl2fastq-1.8.3
                          -- install libexec dir: ./libexec/bcl2fastq-1.8.3
                          -- install include dir: include/bcl2fastq-1.8.3
                          -- install    data dir: share/bcl2fastq-1.8.3
                          -- install     doc dir: doc/bcl2fastq-1.8.3
                          -- install     man dir: man
                          -- Verifying target directories access
                          -- Creating external tools in subdirectory opt
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:461 ] Boost not in cache
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:464 ] _boost_TEST_VERSIONS = 1.46.0;1.46;1.45.0;1.45;1.44.0;1.44
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:466 ] Boost_USE_MULTITHREADED = TRUE
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:468 ] Boost_USE_STATIC_LIBS = 
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:470 ] Boost_USE_STATIC_RUNTIME = 
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:472 ] Boost_ADDITIONAL_VERSIONS = 
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:474 ] Boost_NO_SYSTEM_PATHS = 
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:537 ] Declared as CMake or Environmental Variables:
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:539 ]   BOOST_ROOT = 
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:541 ]   BOOST_INCLUDEDIR = 
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:543 ]   BOOST_LIBRARYDIR = 
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:545 ] _boost_TEST_VERSIONS = 1.46.0;1.46;1.45.0;1.45;1.44.0;1.44
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:598 ] Include debugging info:
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:600 ]   _boost_INCLUDE_SEARCH_DIRS = C:/boost/include;C:/boost;/boost/include;/boost;/sw/local/include
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:602 ]   _boost_PATH_SUFFIXES = boost-1_46_0;boost_1_46_0;boost-1_46;boost_1_46;boost-1_45_0;boost_1_45_0;boost-1_45;boost_1_45;boost-1_44_0;boost_1_44_0;boost-1_44;boost_1_44
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:737 ] guessed _boost_COMPILER = -gcc
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:747 ] _boost_MULTITHREADED = -mt
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:790 ] _boost_RELEASE_ABI_TAG = -
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:792 ] _boost_DEBUG_ABI_TAG = -d
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:835 ] _boost_LIBRARY_SEARCH_DIRS = Boost_INCLUDE_DIR-NOTFOUND/lib;Boost_INCLUDE_DIR-NOTFOUND/../lib;Boost_INCLUDE_DIR-NOTFOUND/stage/lib;C:/boost/lib;C:/boost;/boost/boost___/lib;/boost/boost__/lib;/boost/lib;/boost;/sw/local/lib
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for DATE_TIME_LIBRARY_RELEASE: boost_date_time-gcc-mt-;boost_date_time-gcc-mt;boost_date_time-mt-;boost_date_time-mt;boost_date_time
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for DATE_TIME_LIBRARY_DEBUG: boost_date_time-gcc-mt-d-;boost_date_time-gcc-mt-d;boost_date_time-mt-d-;boost_date_time-mt-d;boost_date_time-mt;boost_date_time
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for FILESYSTEM_LIBRARY_RELEASE: boost_filesystem-gcc-mt-;boost_filesystem-gcc-mt;boost_filesystem-mt-;boost_filesystem-mt;boost_filesystem
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for FILESYSTEM_LIBRARY_DEBUG: boost_filesystem-gcc-mt-d-;boost_filesystem-gcc-mt-d;boost_filesystem-mt-d-;boost_filesystem-mt-d;boost_filesystem-mt;boost_filesystem
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for IOSTREAMS_LIBRARY_RELEASE: boost_iostreams-gcc-mt-;boost_iostreams-gcc-mt;boost_iostreams-mt-;boost_iostreams-mt;boost_iostreams
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for IOSTREAMS_LIBRARY_DEBUG: boost_iostreams-gcc-mt-d-;boost_iostreams-gcc-mt-d;boost_iostreams-mt-d-;boost_iostreams-mt-d;boost_iostreams-mt;boost_iostreams
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for PROGRAM_OPTIONS_LIBRARY_RELEASE: boost_program_options-gcc-mt-;boost_program_options-gcc-mt;boost_program_options-mt-;boost_program_options-mt;boost_program_options
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for PROGRAM_OPTIONS_LIBRARY_DEBUG: boost_program_options-gcc-mt-d-;boost_program_options-gcc-mt-d;boost_program_options-mt-d-;boost_program_options-mt-d;boost_program_options-mt;boost_program_options
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for REGEX_LIBRARY_RELEASE: boost_regex-gcc-mt-;boost_regex-gcc-mt;boost_regex-mt-;boost_regex-mt;boost_regex
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for REGEX_LIBRARY_DEBUG: boost_regex-gcc-mt-d-;boost_regex-gcc-mt-d;boost_regex-mt-d-;boost_regex-mt-d;boost_regex-mt;boost_regex
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for SERIALIZATION_LIBRARY_RELEASE: boost_serialization-gcc-mt-;boost_serialization-gcc-mt;boost_serialization-mt-;boost_serialization-mt;boost_serialization
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for SERIALIZATION_LIBRARY_DEBUG: boost_serialization-gcc-mt-d-;boost_serialization-gcc-mt-d;boost_serialization-mt-d-;boost_serialization-mt-d;boost_serialization-mt;boost_serialization
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for SYSTEM_LIBRARY_RELEASE: boost_system-gcc-mt-;boost_system-gcc-mt;boost_system-mt-;boost_system-mt;boost_system
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for SYSTEM_LIBRARY_DEBUG: boost_system-gcc-mt-d-;boost_system-gcc-mt-d;boost_system-mt-d-;boost_system-mt-d;boost_system-mt;boost_system
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:906 ] Searching for THREAD_LIBRARY_RELEASE: boost_thread-gcc-mt-;boost_thread-gcc-mt;boost_thread-mt-;boost_thread-mt;boost_thread
                          -- [ /tmp/bcl2fastq-1.8.3-build/bootstrap/share/cmake-2.8/Modules/FindBoost.cmake:938 ] Searching for THREAD_LIBRARY_DEBUG: boost_thread-gcc-mt-d-;boost_thread-gcc-mt-d;boost_thread-mt-d-;boost_thread-mt-d;boost_thread-mt;boost_thread
                          -- Could NOT find Boost
                          Unable to find the Boost header files. Please set BOOST_ROOT to the root directory containing Boost or BOOST_INCLUDEDIR to the directory containing Boost's headers.
                          -- Boost 1.44.0 not found. Boost will be built from the distribution...
                          Decompressing /tmp/bcl2fastq-1.8.3/src/../redist/boost_1_44_0.tar.gz
                          Building Boost.Jam with toolset gcc... tools/jam/src/bin.linuxx86_64/bjam
                          Unicode/ICU support for Boost.Regex?... not found.
                          Backing up existing Boost.Build configuration in project-config.jam.5
                          Generating Boost.Build configuration in project-config.jam...
                          
                          Bootstrapping is done. To build, run:
                          
                              ./bjam
                              
                          To adjust configuration, edit 'project-config.jam'.
                          Further information:
                          
                             - Command line help:
                               ./bjam --help
                               
                             - Getting started guide: 
                               http://www.boost.org/more/getting_started/unix-variants.html
                               
                             - Boost.Build documentation:
                               http://www.boost.org/boost-build2/doc/html/index.html
                          
                          Performing configuration checks
                          
                              - has_icu builds           : no
                          
                          Component configuration:
                          
                              - date_time                : building
                              - filesystem               : building
                              - graph                    : not building
                              - graph_parallel           : not building
                              - iostreams                : building
                              - math                     : not building
                              - mpi                      : not building
                              - program_options          : building
                              - python                   : not building
                              - random                   : not building
                              - regex                    : building
                              - serialization            : building
                              - signals                  : not building
                              - system                   : building
                              - test                     : not building
                              - thread                   : building
                              - wave                     : not building
                          
                          ...patience...
                          ...patience...
                          ...found 17154 targets...
                          boost-1_44_0 installed successfully
                          -- Successfuly built boost 1.44.0 from the distribution package...
                          -- Check if the system is big endian
                          -- Searching 16 bit integer
                          -- Looking for sys/types.h
                          -- Looking for sys/types.h - found
                          -- Looking for stdint.h
                          -- Looking for stdint.h - found
                          -- Looking for stddef.h
                          -- Looking for stddef.h - found
                          -- Check size of unsigned short
                          -- Check size of unsigned short - done
                          -- Using unsigned short
                          -- Check if the system is big endian - little endian
                          -- Looking for floorf
                          -- Looking for floorf - found
                          -- Looking for round
                          -- Looking for round - found
                          -- Looking for roundf
                          -- Looking for roundf - found
                          -- Looking for powf
                          -- Looking for powf - found
                          -- Looking for erf
                          -- Looking for erf - found
                          -- Looking for erf
                          -- Looking for erf - found
                          -- Looking for erfc
                          -- Looking for erfc - found
                          -- Looking for erfc
                          -- Looking for erfc - found
                          -- Found ZLIB  header: /usr/include/zlib.h
                          -- Found ZLIB library: /usr/lib/libz.so
                          -- gzip compression supported
                          CMake Error at cmake/cxxConfigure.cmake:84 (message):
                            No support for bzip2 compression
                          Call Stack (most recent call first):
                            c++/CMakeLists.txt:33 (include)
                          
                          
                          -- Configuring incomplete, errors occurred!
                          Couldn't configure the project:
                          
                          /tmp/bcl2fastq-1.8.3-build/bootstrap/bin/cmake -H"/tmp/bcl2fastq-1.8.3/src" -B"/tmp/bcl2fastq-1.8.3-build" -G"Unix Makefiles"  -DCASAVA_PREFIX:PATH=/usr/local/bcl2fastq-1.8.3 -DCASAVA_EXEC_PREFIX:PATH= -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bcl2fastq-1.8.3 -DCASAVA_BINDIR:PATH= -DCASAVA_LIBDIR:PATH= -DCASAVA_LIBEXECDIR:PATH= -DCASAVA_INCLUDEDIR:PATH= -DCASAVA_DATADIR:PATH= -DCASAVA_DOCDIR:PATH= -DCASAVA_MANDIR:PATH= -DCMAKE_BUILD_TYPE:STRING=RelWithDebInfo -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DBoost_DEBUG:BOOL=ON
                          
                          Moving CMakeCache.txt to CMakeCache.txt.removed

                          Comment


                          • #14
                            @slees... i had the same problem, and this solved it...

                            sudo cp /usr/lib/x86_64-linux-gnu/libbz2.so /usr/lib

                            Comment


                            • #15
                              14.04 LTS boost errors

                              I can configure in without problems, but I get a ton of boost errors when I try to run make

                              HTML Code:
                              [CODE]/usr/local/include/boost/bind/bind.hpp:1728:1: note:   template argument deduction/substitution failed:
                              /home/uclg-admin/bcl/bcl2fastq/src/c++/lib/demultiplex/BclDemultiplexer.cpp:65:50: note:   couldn't deduce template parameter ‘M’
                                               boost::bind(&fs::path::string, _1));
                                                                                ^
                              make[2]: *** [c++/lib/demultiplex/CMakeFiles/casava_demultiplex.dir/BclDemultiplexer.cpp.o] Error 1
                              make[1]: *** [c++/lib/demultiplex/CMakeFiles/casava_demultiplex.dir/all] Error 2
                              make: *** [all] Error 2[/CODE]

                              Boost was already complied on this machine, but I've tried removing all traces using sudo apt-get purge libboost* but still no joy

                              Comment

                              Latest Articles

                              Collapse

                              • seqadmin
                                Strategies for Sequencing Challenging Samples
                                by seqadmin


                                Despite advancements in sequencing platforms and related sample preparation technologies, certain sample types continue to present significant challenges that can compromise sequencing results. Pedro Echave, Senior Manager of the Global Business Segment at Revvity, explained that the success of a sequencing experiment ultimately depends on the amount and integrity of the nucleic acid template (RNA or DNA) obtained from a sample. “The better the quality of the nucleic acid isolated...
                                03-22-2024, 06:39 AM
                              • seqadmin
                                Techniques and Challenges in Conservation Genomics
                                by seqadmin



                                The field of conservation genomics centers on applying genomics technologies in support of conservation efforts and the preservation of biodiversity. This article features interviews with two researchers who showcase their innovative work and highlight the current state and future of conservation genomics.

                                Avian Conservation
                                Matthew DeSaix, a recent doctoral graduate from Kristen Ruegg’s lab at The University of Colorado, shared that most of his research...
                                03-08-2024, 10:41 AM

                              ad_right_rmr

                              Collapse

                              News

                              Collapse

                              Topics Statistics Last Post
                              Started by seqadmin, Yesterday, 06:37 PM
                              0 responses
                              10 views
                              0 likes
                              Last Post seqadmin  
                              Started by seqadmin, Yesterday, 06:07 PM
                              0 responses
                              9 views
                              0 likes
                              Last Post seqadmin  
                              Started by seqadmin, 03-22-2024, 10:03 AM
                              0 responses
                              49 views
                              0 likes
                              Last Post seqadmin  
                              Started by seqadmin, 03-21-2024, 07:32 AM
                              0 responses
                              67 views
                              0 likes
                              Last Post seqadmin  
                              Working...
                              X