Seqanswers Leaderboard Ad

Collapse

Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Multireads reported as unique by Tophat

    Hello,

    I am working with RNAseq data, produced on the Illumina Hiseq platform. My reads are paired-end and 76bp long. I map them against the mouse genome with Tophat.

    I have a question regarding how Tophat scores and reports the alignments. As far as I understand, the alignment with the higher score will be reported; in cases where several alignments have the same score, it will report as many as allowed by the --max-multihits option. However, the alignment score is not reported in the output BAM file, since all unique alignments get 255 (in the mapping quality field).

    I have reads aligned to the mt-Co2 (ENSMUSG00000064354) gene in the mitochondrial chromosome, and they are reported as unique hits. However, this gene has an identical copy in chromosome 1, so all the reads also map perfectly there (as confirmed by BLAST), but those alignments are not reported. I have checked that the alignments in chr1 are in the correct orientation and have similar (or even identical) insert sizes.
    Any ideas on why Tophat is not reporting them? Am I missing something here?

    Here are some examples from the SAM output file:
    IL13_5283:1:100:10005:4660 147 MT 7602 255 76M = 7363 -315 CTGAAATTTGTGGATCTAACCATAGCTTTATGCCCATTGTCCTAGAAATGGTTCCACTAAAATATTTCGAAAACTG EEE
    ECDBEEEEEEEAEEEDEEE?EEECEECEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEECEE NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10005:4660 99 MT 7363 255 76M = 7602 315 CTTTGATTCATATATAATCCCAACAAACGACCTAAAACCTGGTGAACTACGACTGCTAGAAGTTGATAACCGAGTC HHH
    HHFHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH@HHHHHHHHFHHHHHEH@BH>HHFCEHCBCCF=D NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10007:10895 147 MT 7282 255 76M = 7040 -318 CAACAACCCCGTATTAACCGTTAAAACCATAGGGCACCAATGATACTGAAGCTACGAATATACTGACTATGAAGAC ??=
    ??7B??=<<A>AD@D?B?ADAD=DDDDDDBDD?DDDDDDDD?DADDDDDDDDDDDDDDDDDDDDBDDDDDDDD NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10007:10895 99 MT 7040 255 76M = 7282 318 CAAGACGCCACATCCCCTATTATAGAAGAGCTAATAAATTTCCATGATCACACACTAATAATTGTTTTCCTAATTA HHH
    HHHHHHHHHHHHHHHHHHHHHGFHHDHHHGHHHHHHHHHGGHHAGHEFFEDEHAGHCBFEH?DEDBAFBAFF@ NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10015:17002 163 MT 7026 255 76M = 7318 368 TCCAACTTGGTCTACAAGACGCCACATCCCCTATTATAGAAGAGCTAATAACTTTCCATGATAACACACTAATAAT 969
    56(4959@<505:3086=87::31286>>962@:,5.@:2569;2>4;.579>+2<3:0((3(+:<)5;=5*A NM:i:2 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10015:17002 83 MT 7318 255 76M = 7026 -368 CCAATGATACTGAAGCTACGAATATACTGACTATGAAGACCTATGCTTTGATTCATATATAATCCCAACAAACGAC 8:;
    =;=:87::8<:::=7;8:=:6:?<>=:<5?5::<=6.<8<=>D<789853886@+>CD@*9>57498:6B9;B NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354



    All suggestions are very much appreciated!

  • #2
    Originally posted by xibarra View Post
    Hello,

    I am working with RNAseq data, produced on the Illumina Hiseq platform. My reads are paired-end and 76bp long. I map them against the mouse genome with Tophat.

    I have a question regarding how Tophat scores and reports the alignments. As far as I understand, the alignment with the higher score will be reported; in cases where several alignments have the same score, it will report as many as allowed by the --max-multihits option. However, the alignment score is not reported in the output BAM file, since all unique alignments get 255 (in the mapping quality field).

    I have reads aligned to the mt-Co2 (ENSMUSG00000064354) gene in the mitochondrial chromosome, and they are reported as unique hits. However, this gene has an identical copy in chromosome 1, so all the reads also map perfectly there (as confirmed by BLAST), but those alignments are not reported. I have checked that the alignments in chr1 are in the correct orientation and have similar (or even identical) insert sizes.
    Any ideas on why Tophat is not reporting them? Am I missing something here?

    Here are some examples from the SAM output file:
    IL13_5283:1:100:10005:4660 147 MT 7602 255 76M = 7363 -315 CTGAAATTTGTGGATCTAACCATAGCTTTATGCCCATTGTCCTAGAAATGGTTCCACTAAAATATTTCGAAAACTG EEE
    ECDBEEEEEEEAEEEDEEE?EEECEECEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEECEE NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10005:4660 99 MT 7363 255 76M = 7602 315 CTTTGATTCATATATAATCCCAACAAACGACCTAAAACCTGGTGAACTACGACTGCTAGAAGTTGATAACCGAGTC HHH
    HHFHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH@HHHHHHHHFHHHHHEH@BH>HHFCEHCBCCF=D NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10007:10895 147 MT 7282 255 76M = 7040 -318 CAACAACCCCGTATTAACCGTTAAAACCATAGGGCACCAATGATACTGAAGCTACGAATATACTGACTATGAAGAC ??=
    ??7B??=<<A>AD@D?B?ADAD=DDDDDDBDD?DDDDDDDD?DADDDDDDDDDDDDDDDDDDDDBDDDDDDDD NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10007:10895 99 MT 7040 255 76M = 7282 318 CAAGACGCCACATCCCCTATTATAGAAGAGCTAATAAATTTCCATGATCACACACTAATAATTGTTTTCCTAATTA HHH
    HHHHHHHHHHHHHHHHHHHHHGFHHDHHHGHHHHHHHHHGGHHAGHEFFEDEHAGHCBFEH?DEDBAFBAFF@ NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10015:17002 163 MT 7026 255 76M = 7318 368 TCCAACTTGGTCTACAAGACGCCACATCCCCTATTATAGAAGAGCTAATAACTTTCCATGATAACACACTAATAAT 969
    56(4959@<505:3086=87::31286>>962@:,5.@:2569;2>4;.579>+2<3:0((3(+:<)5;=5*A NM:i:2 NH:i:1 XF:Z:ENSMUSG00000064354
    IL13_5283:1:100:10015:17002 83 MT 7318 255 76M = 7026 -368 CCAATGATACTGAAGCTACGAATATACTGACTATGAAGACCTATGCTTTGATTCATATATAATCCCAACAAACGAC 8:;
    =;=:87::8<:::=7;8:=:6:?<>=:<5?5::<=6.<8<=>D<789853886@+>CD@*9>57498:6B9;B NM:i:0 NH:i:1 XF:Z:ENSMUSG00000064354



    All suggestions are very much appreciated!
    did you got any reply on this, I have similar issue with TopHat
    Cheers,
    Shriram

    Comment


    • #3
      Hello,
      I never heard anything. I also wrote directly to the Tophat team but they never replied.
      I've now moved to use STAR instead.

      Cheers,
      Ximena

      Comment

      Latest Articles

      Collapse

      • seqadmin
        Current Approaches to Protein Sequencing
        by seqadmin


        Proteins are often described as the workhorses of the cell, and identifying their sequences is key to understanding their role in biological processes and disease. Currently, the most common technique used to determine protein sequences is mass spectrometry. While still a valuable tool, mass spectrometry faces several limitations and requires a highly experienced scientist familiar with the equipment to operate it. Additionally, other proteomic methods, like affinity assays, are constrained...
        04-04-2024, 04:25 PM
      • seqadmin
        Strategies for Sequencing Challenging Samples
        by seqadmin


        Despite advancements in sequencing platforms and related sample preparation technologies, certain sample types continue to present significant challenges that can compromise sequencing results. Pedro Echave, Senior Manager of the Global Business Segment at Revvity, explained that the success of a sequencing experiment ultimately depends on the amount and integrity of the nucleic acid template (RNA or DNA) obtained from a sample. “The better the quality of the nucleic acid isolated...
        03-22-2024, 06:39 AM

      ad_right_rmr

      Collapse

      News

      Collapse

      Topics Statistics Last Post
      Started by seqadmin, 04-11-2024, 12:08 PM
      0 responses
      22 views
      0 likes
      Last Post seqadmin  
      Started by seqadmin, 04-10-2024, 10:19 PM
      0 responses
      24 views
      0 likes
      Last Post seqadmin  
      Started by seqadmin, 04-10-2024, 09:21 AM
      0 responses
      20 views
      0 likes
      Last Post seqadmin  
      Started by seqadmin, 04-04-2024, 09:00 AM
      0 responses
      52 views
      0 likes
      Last Post seqadmin  
      Working...
      X